John West's Ram Bumpers

 

I built the front & rear bumpers from 1/4" plate (See the TDR classified ads wayyy down at the bottom end), traction bars and tailgate from stainless steel tubing, and heavy duty lower control arms from 2" OD 1/4" wall steel tubing.

From John's ad at the TDR site:

Fabricated steel bumpers for '94 & newer Dodge Ram; with 2" receiver and D-rings; bolts to factory frame holes; protects your grill and hood from deer; some options available; primer or gloss black enamel finish; prices start at $500 plus freight.


Large version of top photo(1400x840 - 63Kb)

John's truck: 1996 Ram 2500 4x4 with custom bumpers and suspension components.

5.9 TD tuned to about 260 HP and 600 ft-lbs. by Jim Jessup of Columbus IN
(Jim wrote the Cummins B & C series service manuals). Picture taken at Silver Lake Michigan.
Rides on 287/75 BFG A/T's on Centerline Hellcat 16x8 wheels.
I use Mobile Delvac 1 synthetic oil and K&N air filter.

John West 720 Pfrimmers Chapel Rd. Corydon, IN 47112   812-738-3403
jwestpiw@msn.com  
Return to Gallery 7 HOME